Configuring Web Pass-Through - Samsung WEC8500 Operation Manual

Configuring Web Pass-through

The APC provides the web pass-through function to move to a specific address all the
time when the user uses the web.
Configuration using CLI
[WLAN Configuration]
To configure web pass-through in the WLAN, execute the command as follows:
1
WEC8500# configure terminal
WEC8500/configure# wlan 1
2
WEC8500/configure/wlan 1# security
WEC8500/configure/wlan 1/security# layer3
WEC8500/configure/wlan 1/security/layer3#
3
WEC8500/configure/wlan 1/security/layer3# web-policy pass-through
4
5
6
WEC8500# show wlan security detail 1
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. In the WLANs screen, select WLAN ID, move to
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to configure  WLAN configuration mode of CLI.
Go to configure  WLAN  security  layer 3 configuration mode of
CLI.
Enable the WEB authentication (default: disabled).
o web-policy pass-through
Configure the Pre-Authentication ACL.
o pre-auth-acl [ACL]
Parameter Description
ACL ACL for occurrence of redirection
Configure the Web Page Type.
o web-page-type [Page Type]
Parameter Description
Page Type Web authentication method
• external: Uses the authentication page of an external web
• downloaded: Uses the authentication page downloaded from the
The configuration can be checked using the 'show wlan security detail'
command.
server.
system.
385