Figure 59. Ipwatchd Configuration Window - Samsung WEC8500 Operation Manual

Operator can enter a value between 10 and 300 seconds.
WEC8500# configure terminal
WEC8500/configure#
WEC8500/configure# ipwatch ?
defend-interval
WEC8500/configure# ipwatch defend-interval ?
10 - 300
WEC8500/configure# ipwatch defend-interval 30
The default TIMEOUT value for IP address collision detection is 30 seconds.
When the time is configured, the IPWATCHD daemon is restarted and a log and GARP
is generated if there is an IP collision.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Network>  <ARP> menu in the sub-menus.
After entering a time value (10-300 seconds) that a user wants in the TIMEOUT FOR IP
ADDRESS CONFLICT DETECTION window, click the <Apply> button. Then, the
configuration is applied.
The default value before user configuration is 30 as shown in the below figure.
Figure 59. IPWATCHD Configuration Window
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Ipwatch defend-interval configuration
Ipwatch defend-interval value(seconds)
Parameter Description
VALUE Enter a defend-interval (10-300 sec).
95