Samsung WEC8500 Operation Manual page 107

WEC8500/configure/interface ge2# ip ospf disable ?
all
WEC8500/configure/interface ge2# ip ospf disable all ?
<cr>
WEC8500/configure/interface ge2# ip ospf disable all
WEC8500/configure/interface ge2# ip ospf mtu ?
576 - 65535
WEC8500/configure/interface ge2# ip ospf mtu 600
WEC8500/configure/interface ge2#
WEC8500/configure/interface ge2# ip ospf network ?
broadcast
non-broadcast
point-to-point
point-to-multipoint
WEC8500/configure/interface ge2# ip ospf network
WEC8500/configure/interface ge2# ip ospf authentication ?
message-digest
null
<cr>
WEC8500/configure/interface ge2# ip ospf authentication message-digest ?
<cr>
WEC8500/configure/interface ge2# ip ospf authentication null ?
<cr>
WEC8500/configure/interface ge2# ip ospf authentication null
WEC8500/configure/interface ge2# ip ospf cost ?
1 - 65535
WEC8500/configure/interface ge2# ip ospf cost 2 ?
<cr>
WEC8500/configure/interface ge2# ip ospf database-filter ?
all
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
All functionality
MTU configuration
The default does not use Maximum Transmission Unit (MTU)
configuration.
The range of MTU user configuration is 576-65535.
Network Type configuration
The network type includes 4 types that are broadcast, non-broadcast,
point-to-point, and point-to-multipoint. The Ethernet is broadcast
configuration.
Specify OSPF broadcast multi-access network
Specify OSPF NBMA network
Specify OSPF point-to-point network
Specify OSPF point-to-multipoint network
Authentication configuration
This is CLI that selects whether to use user authentication.
Use message-digest authentication
Use null authentication
OSPF Cost configuration
Enter a cost value between 1 and 65535.
Cost
DATABASE-FILTER configuration
Filter all LSA
88