Figure 248. Managed/Neighbor Ap List Addition Window - Samsung WEC8500 Operation Manual

Figure 248. Managed/Neighbor AP List Addition Window
Station Allow Limit
The WIDS counts the number of frames and number of authentication failures to
distinguish a station that generates too many management frames in a network or that is
continuously failed for authentication. A threshold value is defined for the count and a
station is recognized as an unauthorized station if the count exceeds the threshold.
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wi
WEC8500/configure/wi# device
WEC8500/configure/wi/device# client
WEC8500/configure/wi/device/client#
2
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Wireless Intrusion>  <Station Allow Limit> menu in the sub-menus. And then, enter
a threshold value and click Apply to configure the value in the screen.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the configure  wi  device  client configuration mode.
Configure a threshold.
o allowed-limit [OPTION] [COUNT]
Parameter Description
• 80211-auth-req: Authentication requests threshold per second
OPTION
• 80211-probe-req: Probe requests threshold per second
• 80211-deauth-req: De-authentication requests threshold per second
• 80211-assoc-fail: Association failures threshold per second
• 80211-auth-fail: Authentication failures threshold per second
• 8021x-auth-fail: 802.1x authentication failures threshold per WIDS
interval
• web-auth-fail: Web authentication failures threshold that occurs
continuously
COUNT Threshold value of [OPTION] ranging from 3 to 20
373