Samsung WEC8500 Operation Manual page 224

WEC8500/configure/wlan 1# aaa-override
3
4
5
6
7
8
9
WEC8500/configure/wlan 1# broadcast-enable
10
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
over the APC settings.
Determine whether to configure the Guest service.
o guest-flag
Configure a VLAN ID to use locally.
o local-vlan [VLAN_ID]
Parameter Description
VLAN_ID VLAN ID (range: 1-4094)
Specify the service MAC type.
o mac-type [MAC_TYPE]
Parameter Description
• localMac: An AP itself provides data service.
MAC_TYPE
• splitMac: Provides data service through the APC.
Select a radio bandwidth to provide the WLAN service.
o radio [RADIO]
Parameter Description
• 1: 5 GHz
RADIO
• 2: 2.4 GHz
• 3: Supports both 5/2.4 GHz
Select whether to provide the SSID as hidden. If it is set to 'hidden', the
SSID is not found when other devices do searching.
o suppress-ssid
Select the tunnel mode.
o tunnel-mode [TUNNEL_MODE]
Parameter Description
• LocalBridging: Make all the user traffics are bridged at the AP.
TUNNEL_MODE
• 8023Tunnel: Make all the user traffics are transmitted in the
Broadcast packets can be forwarded to the WLAN. The default value is
'disable'.
Multicast packets can be forwarded to the WLAN. The default value is
'disable'.
802.3 format (Not supported if the MAC type is split mac).
205