Samsung WEC8500 Operation Manual page 370

SECRET
COUNT
FAILOVER
AUTHORIZATION)
Configuring MAC Authentication
The MAC authentication of a RADIUS server is configured as follows:
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# security
WEC8500/configure/wlan 1/security# radius 1
WEC8500/configure/security/radius 1#
2
WEC8500/configure/security/radius 1# mac-auth-pw-type [PW_TYPE]
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Item
IP ADDRESS
SHARED SECRET FORMAT
SHARED SECRET
CONFIRM SHARED
AUTH PORT NUMBER
ACCT PORT NUMBER
RETRANSMIT INTERVAL
TOTAL RETRANSMIT
RETRANSMIT COUNT
COA(CHANGE
Go to configure  security  radius configuration mode of CLI.
Set the password type that will be used for the MAC authentication of the
device.
Parameter
PW_TYPE
Description
• Auth/Acct: Performs authentication and accounting
IP address of the RADIUS server
Key input format for communications with the RADIUS
server
• ASCII: ASCII strings
• HEX: Hexadecimal values
Key for RADIUS server communications
Re-enters the key for RADIUS server communications
for confirmation
Number of the communication port for RADIUS server
authentication
(range: 1-65,535, default value: 1,812)
Number of the communication port for RADIUS server
accounting
(range: 1-65,535, default value: 1,813)
Retransmission interval for a RADIUS message
(range: 1-60, default value: 2, unit: seconds)
Maximum retransmission count of a RADIUS message
(range: 1-20, default value: 10)
Maximum retransmission count of a RADIUS message
before a RADIUS server failover is attempted
(range: 1-10, default value: 3, must be smaller than the
TOTAL RETRANSMIT value)
OF Enable or disable CoA (Change Of Authorization)
• Enable: enable CoA
• Disable: disable CoA
Description
Password type (default value: mac)
• mac: MAC address of the device. Note: it must be a
string whose type must be the same as that of the MAC
string which is used as a user ID when the MAC
351