Status Indicator - Samsung Control Unit User Manual

Air to water heat pump -mono control unit
Table of Contents

Advertisement

STaTUS INdICaToR

Mode
Status
Status
Compressor On
Back-up heater
On
Booster heater
On
Solar thermal
panel On
Back up boiler
On
Water pump On
Domestic water
On
Defrost
operation On
Anti freezing
operation On
Sanitary
operation On
RC120MHXGA_IB_E_34412A(1).indd 13
Display
This icon indicates that the compressor in the outdoor
unit is running.
This icons indicate that the backup heater of the unit
is operating, when there is a high demand for heating
capacity. The backup heater provides extra heating
capacity in case of low ambient outdoor temperature
(high heating load).
This icon indicates that the booster heater is active.
The booster heater provides auxiliary heating for the
domestic hot water tank. The booster heater is located
in the domestic hot water tank. The icon is not used
when the domestic hot water tank is not installed.
It indicates when the solar panel is powered on. DHW
mode is stopping while solar panel is on in order to save
your energy cost.
The Back up boiler shall start to work as soon as
outdoor temperature reach to the targeted temperature.
Users can adjust the temperature to allow the back up
boiler work. The icon shall not be displayed without the
Installation of the back up boiler.
This icon indicates that the circulation pump is active.
This icon indicates when the domestic water heating
mode is operating.
This icon indicates that the defrost mode is active.
The system automatically maintains the water
temperature above a freezing point to prevent from
freezing-fracture of piping system.
This function disinfects the DHW tank by periodically
heating the domestic water to a specific temperature.
Function
Checking the function _13
2012-02-08 오후 2:35:35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents