Chapter 2: Managing Switch
Item
Detail
Delete
Refresh
Sel
Local Port
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
System Name
Time to Live
SNMP
106
LLDP Remote Device Info
The LLDP Remote Device Info page allows you to view information about
remote devices, LLDP information must be available on the switch.
To access this page, click Management > LLDP > LLDP Remote Device
Info.
Figure 90. Management > LLDP > LLDP Remote Device Info
The following table describes the items in Figure 90.
Table 86. LLDP Remote Device Info
Description
Click to display the device details.
Click to delete the selected devices.
Click to refresh the remote device information list.
Indicates that a device that is selected
Indicates the local port connected to the remote device
Indicates the Chassis ID Subtype
Indicates the Chassis ID
Indicates the Port ID Subtype
Indicates the Port ID
Indicates the System ID
Indicates the Time to Live interval
LLDP Overloading
To access this page, click Management > LLDP > LLDP Overloading.
The LLDP Overloading settings in the ensuing table are informational
only: Port, Total (Bytes), Left to Send (Bytes), Status and Status
(Mandatory TLVs, 802.3 TLVs, Optional TLVs and 802.1 TLVs).
Simple Network Management Protocol (SNMP) is a protocol to facilitate
the monitoring and exchange of management information between
network devices. Through SNMP, the health of the network or status of a
particular device can be determined.
SNMP Settings
The SNMP Settings page allows you to set the SNMP daemon state
(enabled or disabled).