Figure 132: Removing A Qfx10000 Line Card - Juniper QFX10016 Hardware Manual
Hide thumbs
Also See for QFX10016:
- Hardware manual (439 pages) ,
- Quick start manual (31 pages) ,
- Hardware manual (306 pages)
Table of Contents
Advertisement
QFX10016 Switch Hardware Guide
234
Figure 132: Removing a QFX10000 Line Card
Using the handles, slide the line card halfway out of the chassis.
6.
CAUTION:
Do not stack line cards on top of one another or on top of any
other component. Place each line card separately in the electrostatic bag
or on the antistatic mat placed on a flat, stable surface.
CAUTION:
Each QFX10000 line card weighs between 20.9 lb (9.5 kg) and
27.3 lb (12.4 kg). Be prepared to support the full weight as you slide the
line card out of the chassis.
Grasp both sides of line card at midpoint and remove the line card from the chassis.
7.
Either have someone assist you in putting the line card into the electrostatic bag or
rest the card on the antistatic mat. Take care not to bump or store the line cards on
the connectors. See
Figure 133 on page
235.
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Table of Contents
