Figure 104: Removing The Psu Cover Panel On A Qfx10008; Figure 105: Removing The Psu Cover Panel On A Qfx10016 - Juniper QFX10016 Hardware Manual

Hide thumbs Also See for QFX10016:

Table of Contents

QFX10016 Switch Hardware Guide

Figure 104: Removing the PSU Cover Panel on a QFX10008

Unscrew the captive screw in the counterclockwise direction by using the

Phillips (+) screwdriver, number 1.

Pull the captive screw away from the faceplate of the power supply to release the

You can install the power supplies in any slot labeled

(top to bottom) on a QFX10008 and

Using both hands, place the power supply in the power supply slot on the rear of the

switch. Slide the power supply straight into the chassis until the power supply is fully