Installing The Mounting Hardware For A Qfx10000; Table 63: Qfx10000 Rack-Mounting Kit; Table 64: Qfx10000 Front Panel Kit - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide

Table 63: QFX10000 Rack-Mounting Kit

Component
Phillips flat-head screws
Rear mounting brackets
Front-right mounting bracket
Front-left mounting bracket

Table 64: QFX10000 Front Panel Kit

Component
Front panel
Left base bracket
Right base bracket
Latch brackets
Phillips flat-head screws
Warranty card
Related
Documentation

Installing the Mounting Hardware for a QFX10000

150
Compare the contents of the front panel kit with
6.
QFX10008 Components and Configurations
QFX10016 Components and Configurations on page 12
The switch can be installed in a four-post rack or in an open-frame rack. Install the
mounting hardware on the rack before installing the switch.
To mount the chassis on a four-post rack, you must first install the mounting brackets
in the rack. QFX10008 and QFX10016 switches come with a four-piece set of mounting
brackets that supports the chassis in the rack. If you prefer a solid-shelf design for the
rack, JNP-MOD-RMK-4PST is available by separate order.
NOTE: Two-post installation racks are not supported.
Quantity
12
2
1
1
Table 64 on page 150.
Quantity
1
1
1
2
8
1
Copyright © 2017, Juniper Networks, Inc.