Removing A Qfx10000 Switch Interface Board - Juniper QFX10016 Hardware Manual

Related
Documentation

Removing a QFX10000 Switch Interface Board

Copyright © 2017, Juniper Networks, Inc.
PFE #3
PFE #4
PFE #5
FASIC #1 (plane 1) Active
FPC #0
PFE #0
PFE #1
PFE #2
PFE #3
PFE #4
PFE #5
FPC #3
PFE #0
PFE #1
PFE #2
PFE #3
PFE #4
PFE #5
SIB #1 Empty
SIB #2 Empty
SIB #3 Empty
SIB #4 Empty
SIB #5 Empty
root> show chassis fabric plane-location
------------Fabric Plane Locations-------------
SIB Planes
0 0
1 2
2 4
3 6
4 8
5 10
NOTE: If you completely powered off the SIB using the
power-off slot slot
to bring the SIB online. To delete the configuration and bring a replacement
SIB online, use the
Removing a QFX10000 Fan Tray on page 180
Removing a QFX10000 Switch Interface Board on page 221
A QFX10008 and QFX10016 switch has six Switch Interface Boards (SIBs) that are located
in the middle of the chassis behind the fan trays.
the left fan tray and SIB 3 through
remove the appropriate fan tray to access the failing SIB. See
Fan Tray" on page 180.
Ensure you have the following equipment on hand before replacing a SIB:
Chapter 18: Replacing Switch Fabric Cards
: OK
: OK
: OK
: OK
: OK
: OK
: OK
: OK
: OK
: OK
: OK
: OK
: OK
: OK
: OK
1
3
5
7
9
11
command, you must delete the configuration in order
delete chassis sib power-off slot slot number
SIB 0
SIB 5 are located behind the right fan tray. You must
set chassis sib
command.
through are located behind
SIB 2
"Removing a QFX10000
221