Table 16: Fan Tray Controller Leds On A Qfx100000 - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide

Table 16: Fan Tray Controller LEDs on a QFX100000

Name
Fan controller power
Fan tray controller status
Related
Documentation
42
Color State
Green On steadily
Yellow Blinking
None Off
Green On steadily
Green Blinking
Yellow Blinking
None Off
QFX10008 Cooling System and Airflow
QFX10016 Cooling System and Airflow on page 33
Installing a QFX10000 Fan Tray on page 177
Removing a QFX10000 Fan Tray on page 180
Installing a QFX10000 Fan Tray Controller on page 185
Removing a QFX10000 Fan Tray Controller on page 187
Description
The fan tray controller has power and is
operating normally.
A power error has been detected in the fan
tray controller. Replace the fan tray controller
as soon as possible. To maintain proper
airflow through the chassis, leave the fan tray
installed in the chassis until you are ready to
replace the fan tray controller.
The fan tray controller is not powered on or is
not receiving power.
The fan tray controller is online and is
operating normally.
The beacon feature is enabled. This feature
is enabled using the request chassis beacon
command.
An error has been detected in the fan tray
controller. Replace the fan tray controller as
soon as possible. To maintain proper airflow
through the chassis, leave the fan tray
installed in the chassis until you are ready to
replace the fan tray controller.
The fan tray controller is not receiving power.
Copyright © 2017, Juniper Networks, Inc.