Juniper QFX10016 Hardware Manual page 310

QFX10016 Switch Hardware Guide
Related
Documentation
286
Enter the following command on the device:
5.
root@device% dd if=/var/tmp/filename of=/dev/da1 bs=1m
The device writes the installation media image to the USB device:
root@device% dd if=install-media-qfx-5e-15.1X53-D30.5-domestic.img of=/dev/da0
bs=1m
1399+0 records in
1399+0 records out
1466957824 bytes transferred in 394.081902 secs (3722469 bytes/sec)
Log out of the shell:
6.
root@device% exit
% exit
user@device>
USB Port Specifications for the QFX Series on page 136
Performing a Recovery Installation
Performing a QFabric System Recovery Installation on the Director Group
Performing a Recovery Installation Using an Emergency Boot Device on page 287
Copyright © 2017, Juniper Networks, Inc.