Qfx10000-30C Line Card; Overview; Channelizing 40-Gigabit Ports; Figure 40: Qfx10000-30C Port Panel - Juniper QFX10016 Hardware Manual

Related
Documentation

QFX10000-30C Line Card

Overview

Channelizing 40-Gigabit Ports

Copyright © 2017, Juniper Networks, Inc.
QFX10000 Field-Replaceable Units on page 20
Channelizing Interfaces
QFX10000 Line Card LEDs on page 85
Installing a QFX10000 Line Card on page 229
The QFX10000-30C line card consists of thirty 28-Gbps QSFP+ Pluggable Solution
(QSFP28) cages that support 40-Gigabit Ethernet or 100-Gigabit Ethernet optical
transceivers. The QFX10000-30C ports automatically detect the type of transceiver
installed and set the configuration to the appropriate speed. The line card can support
10-Gigabit Ethernet by channelizing the 40-Gigabit ports. Channelization is supported
on fiber breakout cable using standard structured cabling techniques.
The QFX10000-30C line card is supported on Junos OS Release 15.1X53-D30 and later.
Support for channelizing the 40-Gigabit Ethernet ports to four independent 10-Gigabit
Ethernet ports is supported in Junos OS Release 17.1R1 and later.
This topic describes:
Overview on page 61
Channelizing 40-Gigabit Ports on page 61
Switch Ports on page 63
Status and Activity LEDs on page 63
The line cards in QFX10000 modular switches combine a Packet Forwarding Engine and
Ethernet interfaces in a single assembly. Line cards are field-replaceable units (FRUs)
that can be installed in the line card slots on the front of the switch chassis. The line cards
are hot-insertable and hot-removable; you can remove and replace them without
powering off the switch or disrupting switch functions. See

Figure 40: QFX10000-30C Port Panel

1— Power and status LEDs
Beginning with Junos OS Release 17.1R1, 40-Gigabit Ethernet ports on the QFX10000-30C
line card can be channelized to 10-Gigabit Ethernet. When ports are in channelization
Chapter 7: Line Card Components and Descriptions
Figure 40 on page
2— Network ports
61.
61