Figure 112: Connector Edge Of A Line Card - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide
214

Figure 112: Connector Edge of a Line Card

1— Connectors
If you must rest a line card or control board on an edge, place a cushion between the
4.
edge and the surface.
CAUTION: Do not stack line cards or control boards on top of one another
or on top of any other component.
Place each line card separately in an electrostatic bag or on an antistatic mat placed
5.
on a flat, stable surface.
Copyright © 2017, Juniper Networks, Inc.