Figure 63: Attaching Front Panel Brackets On A Qfx10016 - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide
158

Figure 63: Attaching Front Panel Brackets on a QFX10016

Use the final two mounting screws to attach a latch bracket to the top right of the
5.
chassis frame so there are brackets on all four corners of the front of the chassis.
Lift the front panel and rest it on the two bottom brackets.
6.
Slide the panel back on the bracket glides until it engages on the two ramps.
7.
Tilt the panel towards the chassis until it is vertical with the chassis. The blue release
8.
buttons on the side of the panel click into place (see
QFX10008 and Figure 65 on page 160
Figure 64 on page 159
for QFX10016).
Copyright © 2017, Juniper Networks, Inc.
for