Laser And Led Safety Guidelines And Warnings For The Qfx Series; Class 1M Laser Product Warning - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide
Related
Documentation

Laser and LED Safety Guidelines and Warnings for the QFX Series

Class 1M Laser Product Warning

316
deverá evitar a exposição à radiação e não deverá olhar fixamente para
orifícios que se encontrarem a descoberto.
¡Atención! Debido a que la apertura del puerto puede emitir radiación invisible
cuando no existe un cable de fibra conectado, evite mirar directamente a las
aperturas para no exponerse a la radiación.
Varning! Osynlig strålning kan avges från en portöppning utan ansluten
fiberkabel och du bör därför undvika att bli utsatt för strålning genom att inte
stirra in i oskyddade öppningar.
General Safety Guidelines and Warnings on page 297
Laser and LED Safety Guidelines and Warnings
Installation Instructions Warning on page 305
Grounded Equipment Warning on page 312
In addition to the general guidelines provided in Laser and LED Safety Guidelines and
Warnings, follow these warnings and guidelines that are specific to QFX Series devices.
QFX Series devices are equipped with laser transmitters:
SFP and SFP+ transceivers are classified as Class 1 Laser Products (complies with 21
CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice 50, dated July
26, 2001) or Class 1 LED Products.
QSFP+ and QSFP28 transceivers are classified as Class 1M Laser Products (IEC 60825-1
2001–01).
Observe the following guidelines and warnings:
Class 1M Laser Product Warning on page 316
Class 1M Laser Radiation Warning on page 317
Unterminated Fiber-Optic Cable Warning on page 317
WARNING: Class 1M laser product.
Waarschuwing Laserproducten van Klasse 1M (IEC).
Varoitus Luokan 1M (IEC) lasertuotteita.
Attention Produits laser catégorie 1M (IEC).
Copyright © 2017, Juniper Networks, Inc.