Qfx10K-12C-Dwdm Coherent Line Card; Table 28: Qsfp+ And Qsfp28 Network Port Status And Activity Leds - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide

Table 28: QSFP+ and QSFP28 Network Port Status and Activity LEDs

Color State
Unlit Off
Green On steadily
Yellow or Amber On steadily
Slow blink, or blip
Blinking
Related
Documentation

QFX10K-12C-DWDM Coherent Line Card

70
Description
The port is administratively disabled, there is no power, the link is down, or a
transceiver is not present. All sub-channels are disabled.
A link is established. When channelized, all sub-channels are up. When not
channelized, it indicates no activity.
At least one channel link is up, but not all channels are up.
The beacon function is enabled on one or more sub-channels.
One or more sub-channels has a fault condition.
QFX10000 Field-Replaceable Units on page 20
Channelizing Interfaces
QFX10000 Line Card LEDs on page 85
Installing a QFX10000 Line Card on page 229
The QFX10K-12C-DWDM line card runs Juniper Networks Junos OS for QFX10000 modular
chassis software on Juniper Networks JNP10K-LC1104 hardware. The QFX10K-12C-DWDM
line card provides up to 1.2 Tbps of packet forwarding for cloud providers, service providers,
and enterprises that need coherent dense wavelength-division multiplexing (DWDM)
with MACsec security features. The 6-port line card, with built-in optics, supports flexible
rate modulation at 100 Gbps, 150 Gbps, and 200 Gbps speeds. A maximum of four
QFX10K-12C-DWDM line cards are supported in either the QFX10008 switch chassis or
the QFX10016 switch chassis.
The QFX10K-12C-DWDM line card is supported on Junos OS Release 17.2R1 and later.
This topic includes:
Hardware Features on page 71
Compatibility on page 73
Optical Transmit Specifications on page 73
Optical Receive Specifications on page 74
Status and Activity LEDs on page 75
Software Features on page 76
Alarms, Errors, and Events on page 77
OT and ET Interface Alarms and Defects on page 83
Copyright © 2017, Juniper Networks, Inc.