Qfx10000 Ac Power Supply Leds; Figure 29: Leds On An Ac Power Supply In Qfx10000 Switches; Table 17: Leds On An Ac Power Supply In Qfx10000 - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide

QFX10000 AC Power Supply LEDs

Table 17: LEDs on an AC Power Supply in QFX10000

LED
INP1 or INP2
PWR OK
48
An AC power supply has four LEDs on its faceplate:
These LEDs display information about the status of the power supply. See
Figure 29 on page 48.

Figure 29: LEDs on an AC Power Supply in QFX10000 Switches

1— FAULT
2— PWR OK
Table 17 on page 48 describes the LEDs on an AC power supply in QFX10008 and
QFX10016 modular chassis.
Color State
Yellow Blinking
Green Solid
Dark Unlit
Green Solid
Yellow Blinking
INP1
1 2 3 4
3— INP2
4— INP1
Description
Indicates one of the following:
AC power input voltage is not within normal operating
range.
AC is within operating range (200–240 VAC).
The power supply is switched off.
DC power output is within normal operating range.
The output is out of the limits.
, , , and
INP2 PWR OK FAULT
–Source input 2
–Source input 1
Copyright © 2017, Juniper Networks, Inc.
.