Juniper QFX10016 Hardware Manual page 288

QFX10016 Switch Hardware Guide
264
To remove the switch using a mechanical lift (see
Use the appropriate Phillips (+) screwdriver to remove the 12 mounting screws that
1.
attach the chassis front-mounting brackets to the rack.
Move the lift to the rack and position it so that its platform is centers about 0.5 in.
2.
(1.27 cm) below the bottom of the switch chassis and as close to it as possible.
Carefully slide the switch from the adjustable mounting brackets attached to the rack
3.
onto the lift.
Move the lift away from the rack and lower the lift.
4.
Use the lift to transport the switch to its new location.
5.
Figure 156 on page 265):
Copyright © 2017, Juniper Networks, Inc.