Figure 84: Replacing A Qfx10008 Fan Tray Controller; Figure 85: Replacing A Qfx10016 Fan Tray Controller - Juniper QFX10016 Hardware Manual
Hide thumbs
Also See for QFX10016:
- Hardware manual (439 pages) ,
- Quick start manual (31 pages) ,
- Quick start manual (24 pages)
Table of Contents
Advertisement
QFX10016 Switch Hardware Guide
Related
Documentation
186
To install a fan tray controller:
Remove the replacement fan tray controller from the electrostatic bag.
1.
Carefully slide the fan tray controller into the fan tray controller slot until it is flush
2.
with the mounting holes. See
Figure 84: Replacing a QFX10008 Fan Tray Controller
Figure 85: Replacing a QFX10016 Fan Tray Controller
Using a Phillips screwdriver, tighten the captive screws for the fan tray controller.
3.
Replace the fan tray. See
4.
Installing a QFX10000 Fan Tray on page 177
Removing a QFX10000 Fan Tray Controller on page 187
Removing a QFX10000 Fan Tray on page 180
Figure 84 on page
186.
"Installing a QFX10000 Fan Tray" on page
177.
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Table of Contents
