QFX10016 Switch Hardware Guide
24
Figure 13: QFX10000 Cable Management System
The cable management system is comprised of a set of handle extensions and a tray
that snaps to the extensions (see
handle extensions can be used with or without the cable tray. It is not necessary to remove
the handle extensions if you want to remove a line card.
Figure 14: Cable Management Parts
1—
Handle extensions
Cables are draped across or under the handle extensions and then secured with cable
wraps (see
Figure 15 on page
Figure 14 on page
24) for an individual line card. The
2—
Cable tray
25).
Copyright © 2017, Juniper Networks, Inc.