QFX10016 Switch Hardware Guide
236
Phillips (+) screwdriver, number 2
To install the cable management system (see
Open the shipping carton for cable management system and check that you have:
1.
Two handle extensions
One cable tray
Figure 134: Cable Management System Components
Use the Phillips screwdriver to loosen and remove the screws on the two line card
2.
handles (see
Figure 135 on page
Figure 135: Removing the Handle Screws
Replace the blue cap on the line card handle with the two handle extensions (see
3.
Figure 136 on page
237).
Figure 134 on page
236).
Copyright © 2017, Juniper Networks, Inc.
236):