Installing The Qfx10000 Cable Management System; Figure 133: Qfx10000 Line Card Connectors - Juniper QFX10016 Hardware Manual

Related
Documentation

Installing the QFX10000 Cable Management System

Copyright © 2017, Juniper Networks, Inc.

Figure 133: QFX10000 Line Card Connectors

1— Connectors
If you are not installing a line card in the emptied line card slot within a short time,
8.
install a blank cover panel over the slot. Do this to protect the interior of the chassis
from dust or other foreign substances and to ensure that the airflow inside the chassis
is not disrupted.
Handling and Storing QFX10000 Line Cards, Control Boards, and SIBs on page 213
Installing a QFX10000 Line Card on page 229
The QFX10000 cable management system is an optional kit that can be ordered to
organize and protect optical cabling attached to the line cards. After a card is installed,
you can still remove the line card without needing to remove the cable management
system.
Ensure that you have the following parts and tools available to install the QFX10000
cable management system on a line card:
Chapter 19: Installing and Replacing Line Cards
235