Juniper QFX10016 Hardware Manual page 140

QFX10016 Switch Hardware Guide
116
Table 46: Line Card Power Consumption (continued)
Number
of Line
Cards QFX10000-36Q
9 6050 W
10 6750 W
11 7425 W
12 8100 W
13 8775 W
14 9450 W
15 10125 W
16 10800 W
*
NOTE: In a redundant DC configuration, a maximum of 14 QFX10000-30C
line cards are supported.
NOTE: The QFX10000-12C- DWDM line card is designed to comply with
NEBS regulations on the QFX10000 line of modular switch chassis when
these switches are used in typical configurations. In a typical configuration,
a QFX10016 switch supports up to sixteen line cards, with up to four
QFX10000-12C-DWDM in any of the sixteen slots.
To comply with EMC regulations, you must also install front panel on the
QFX10016 chassis. See
page 156.
For example, for a QFX10016 with six QFX10000-36Q line cards and five
QFX10000-30C, the maximum power consumption is:
= 6 (power consumed by QFX10000-36Q in watts) + 5 (power consumed by
QFX10000-30C line cards in watts)
= 6 (650 W) + 5 (1150 W)
= (4050 W + 5750 W)
= 9800 W
QFX10000-30C QFX10000-60S-6Q
10350 W 4095 W
11500 W 4550 W
12650 W 5005 W
13800 W 5460 W
14950 W 5915 W
16100 W 6370 W
*
17250 W 6825 W
*
18400 W 7280 W
"Installing the Front Panel on a QFX10000" on
Copyright © 2017, Juniper Networks, Inc.
QFX10000-12C-DWDM
—
—
—
—
—
—
—
—