Qfx10016 Components And Configurations; Table 4: Qfx10016 Hardware Configurations - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide

QFX10016 Components and Configurations

Table 4: QFX10016 Hardware Configurations

Switch Configuration
Base AC configuration
QFX10016-BASE
Redundant AC configuration
QFX10016-REDUND
Redundant DC configuration
QFX10008-REDUND-DC
12
QFX10000 Optional Equipment on page 23
QFX10000-36Q Line Card on page 55
QFX10000-30C Line Card on page 61
Table 4 on page 12 lists the four hardware configurations for a QFX10016 modular
chassis—base (AC version), and redundant (AC and DC versions)—and the components
included in each configuration.
Configuration Components
Chassis, including power bus
One Control Board
One Control Board cover panel
Two fan tray controllers
Two fan trays
Five 2700 W AC power supplies
Five power supply cover panels
Ten power cords
Five Switch Interface Boards (SIBs)
One SIB cover panel
Sixteen line card cover panels
Chassis, including power bus
Two Control Boards
Two fan tray controllers
Two fan trays
Ten 2700 W AC power supplies
Twenty power cords
Six SIBs
Sixteen line card cover panels
Chassis, including power bus
Two Control Boards
Two fan tray controllers
Two fan trays
Ten 2500 W DC power supplies
Six SIBs
Sixteen line card cover panels
NOTE: You can install up to 8 line cards (any combination of line cards) in
the QFX10008 and 16 line cards in the QFX10016.
Copyright © 2017, Juniper Networks, Inc.