Replacing Power Supplies; Installing A Qfx10000 Ac Power Supply - Juniper QFX10016 Hardware Manual

CHAPTER 17

Replacing Power Supplies

Installing a QFX10000 AC Power Supply

Copyright © 2017, Juniper Networks, Inc.
Installing a QFX10000 AC Power Supply on page 189
Removing a QFX10000 AC Power Supply on page 194
Installing a QFX10000 DC Power Supply on page 198
Removing a QFX10000 DC Power Supply on page 207
The AC power supply in a QFX10008 and QFX10016 chassis is a hot-insertable and
hot-removable field-replaceable unit (FRU). You can install up to 6 AC power supplies
in a QFX10008 and 10 in a QFX10016 switch chassis. All AC power supplies install in the
rear of the chassis in the slots provided along the left side.
CAUTION: Do not mix AC and DC power supplies in the same chassis.
Before you install an AC power supply in the switch:
Ensure you understand how to prevent ESD damage. See
Discharge Damage" on page
If the AC power source outlets have a power switch, set them to the off (
Ensure that you have the following parts and tools available to install an AC power supply:
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 1
Power cords appropriate for your geographical location. See
Specifications" on page
Power cord retainer clips
To install an AC power supply in a QFX10008 or QFX10016:
327.
120.
"Prevention of Electrostatic
) position.
O
"QFX10000 Power Cord
189