Figure 125: Esd Point On Qfx10008 Chassis Front; Figure 126: Esd Point On Qfx10016 Chassis Front; Figure 127: Removing The Cover Panel For A Line Card - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide
230
To install a line card in the switch chassis:
Attach the ESD grounding strap to your bare wrist and connect the strap to the ESD
1.
point on the switch chassis. The ESD point is located above the status LED panel on
the front of the switch chassis. See

Figure 125: ESD Point on QFX10008 Chassis Front

1— ESD point

Figure 126: ESD Point on QFX10016 Chassis Front

Remove the cover panel by grasping the handles and pulling straight out to expose
2.
the slot for the line card. See

Figure 127: Removing the Cover Panel for a Line Card

Figure 125 on page 230
1
Figure 127 on page 230.
Copyright © 2017, Juniper Networks, Inc.
and Figure 126 on page 230.