Channelization Of 40-Gigabit Ethernet Ports; Figure 44: Qfx10000-60S-6Q Port Groups; Table 26: Qfx10000-60S-6Q Port Mapping - Juniper QFX10016 Hardware Manual

Table 26: QFX10000-60S-6Q Port Mapping

4X10-Gigabit
Port Number Ethernet
60
61
62
63
64
65

Channelization of 40-Gigabit Ethernet Ports

Copyright © 2017, Juniper Networks, Inc.

Figure 44: QFX10000-60S-6Q Port Groups

4X10-Gigabit
Channelized 40-Gigabit
Port Group Ethernet
Channelization from a 40-Gigabit Ethernet port into 4 independent 10-Gigabit Ethernet
ports is supported on the QSFP28 and QSFP+ ports. Channelization to 50-Gbps or
25-Gbps speed is not supported on the 100-Gigabit Ethernet QSFP28 port. All ports in
the port group are channelized when port
be channelized individually.
To channelize a 40-Gbps port to 4 independent 10-Gbps ports, use the
slot-number pic pic-number port port-number channel-speed speed
to channelize ports 60 through
[edit chassis fpc 6 pic 1]
user@switch# set port 60 channel-speed 10g
Review your configuration and issue the
If you want to return the port to the default, delete the
configuration at the
[chassis fpc 6 pic 1 port port-number]
configuration. The network port is reset to the default 40-Gigabit Ethernet interface.
[edit chassis fpc 6 pic 1]
user@switch# delete port 60 channel-speed 10g
Chapter 7: Line Card Components and Descriptions
100-Gigabit
Ethernet 100-Gigabit Ethernet Disables
61, 62
– –
– –
– –
63, 65
– –
or port are channelized. Ports cannot
60 64
62 for a line card in slot 6 :
command.
commit
speed
hierarchy level and commit the
set chassis fpc
command. For example,
statement from the
67