Qfx10000-60S-6Q Line Card; Table 25: Network Port Status And Activity Leds On A Qfx10000-30C Line - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide
Table 25: Network Port Status and Activity LEDs on a QFX10000-30C Line Card
Color State
Unlit Off
Green On steadily
Blinking
Yellow or Amber On steadily
(channelized)
Flashing
Slow blink, or blip
Blinking
Yellow or Amber Blinking
(non-channelized)
Related
Documentation

QFX10000-60S-6Q Line Card

64
Description
The port is administratively disabled, there is no power, the link is down, or a
transceiver is not present. All sub-channels are disabled.
A link is established. When channelized, all sub-channels are up. When not
channelized, it indicates no activity.
A link is up and there is activity. When not channelized, it indicates the port is up
and active in either 40-Gigabit or 100-Gigabit mode. When channelized, all four
channels are up and active.
At least one channel link is up, but not all channels are up. There is no activity on
the channel link.
At least one channel link is up, but not all channels are up. There is activity on the
channel link.
The beacon function is enabled on one or more sub-channels.
One or more sub-channels has a fault condition.
A single LED blinking indicates and interface fault. All four LEDs blink to indicate
the beacon function was enabled on the port.
QFX10000 Field-Replaceable Units on page 20
Channelizing Interfaces
QFX10000 Line Card LEDs on page 85
Installing a QFX10000 Line Card on page 229
The QFX10000-60S-6Q line card consists of 60 small form-factor pluggable plus (SFP+)
ports,that support 10-Gbps or 1-Gbps port speeds, 2 dual-speed QSFP28 ports that
support either 40-Gbps or 100-Gbps port speed, and 4 QSFP+ ports that support
40-Gbps. All of the SFP+ ports are configured to 10-Gbps by default. The QSFP28 ports
are configured to 40-Gbps by default, but port
can be configured to support either 40-Gigabit Ethernet or 100-Gigabit Ethernet optical
transceivers. See the Hardware Compatibility Tool
transceivers.
The QFX10000-60S-6Q line card is supported on Junos OS Release 17.1R1 and later.
and port are dual-speed ports and
60 64
for details of supported optical
Copyright © 2017, Juniper Networks, Inc.