Juniper QFX10016 Hardware Manual page 39

Table 5: CLI Equivalents of Terms Used in Documentation for QFX10000 Switches (continued)
Hardware
Item (CLI) Description (CLI)
PSU (n) One of the following:
QFX10000-PWR-AC
QFX10000-PWR-DC
Fan tray QFX10008-FAN
QFX10016-FAN
SIB (n) This field indicates:
State of the fabric
plane:
Active
Spare
Check State
Status of the
Packet
Forwarding
Engine in each
fabric plane:
Links OK
Error
DPC (n) –
PIC (n) –
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Value (CLI)
n is a value in the range of
0–5. The value corresponds
to the power supply slot
number.
–
n is a value in the range of
0–5.
n is a value in the range of
0–7.
Value of n is always 0.
QFX10016 Hardware Overview on page 3
QFX10008 Hardware Overview
Configuring a QFX10000 on page 171
Item In Documentation Additional Information
AC or DC power supply
Fan tray QFX10008 Cooling System
and Airflow
"QFX10016 Cooling
System and Airflow" on
page 33
Fabric plane show chassis fabric sibs
The switch does not have show chassis fabric map
actual Dense Port
Concentrators
(DPCs)–the line cards are
the DPC equivalents on
the switch.
– Understanding Interface
Naming Conventions
Chapter 1: System Overview
QFX10000 AC Power
Supply on page 43
QFX10000 DC Power
Supply on page 46
15