Line Card Components And Descriptions; Qfx10000-36Q Line Card; Overview - Juniper QFX10016 Hardware Manual

CHAPTER 7

Line Card Components and Descriptions

QFX10000-36Q Line Card

Overview

Copyright © 2017, Juniper Networks, Inc.
QFX10000-36Q Line Card on page 55
QFX10000-30C Line Card on page 61
QFX10000-60S-6Q Line Card on page 64
QFX10K-12C-DWDM Coherent Line Card on page 70
QFX10000 Line Card LEDs on page 85
1.2 Terabyte DWDM OTN Module Wavelengths on page 86
The QFX10000-36Q line card consists of 36 quad small form-factor pluggable plus
(QSFP+) ports that support 40-Gigabit Ethernet optical transceivers. Out of these 36
ports, 12 ports are QSFP28 capable. The QSFP28 capable ports are dual speed and can
support either 40-Gigabit or 100-Gigabit Ethernet optical transceivers. The line card can
support 10-Gigabit Ethernet by channelizing the 40-Gigabit ports. Channelization is
supported on fiber breakout cable using standard structured cabling techniques.
The QFX10000-36Q line card is supported on Junos OS Release 15.1X53-D30 and later.
This topic describes:
Overview on page 55
Switch Ports on page 56
Status and Activity LEDs on page 60
The line cards in QFX10000 modular switches combine a Packet Forwarding Engine and
Ethernet interfaces in a single assembly. Line cards are field-replaceable units (FRUs)
that can be installed in the line card slots on the front of the switch chassis. The line cards
are hot-insertable and hot-removable; you can remove and replace them without
powering off the switch or disrupting switch functions. See Figure 34 on page 56.
55