Unpacking The Qfx10016 - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide
Related
Documentation

Unpacking the QFX10016

142
Connect power to the power supplies following either the instructions in
5.
AC Power to a QFX10000" on page 165
page 165.
Connect to the network.
6.
To connect the switch to a network for out-of-band management, follow instructions
in Connecting a QFX10000 to a Network for Out-of-Band Management.
To connect the switch to a management console, follow instructions in
a Device to a Management Console by Using an RJ-45 Connector" on page
Configure the switch, following the instructions in
7.
page 171.
Install optional equipment such as the SATA SSD or the cable management system.
8.
See "Installing the Optional SATA Solid State Drive in a QFX10000" on page 245
"Installing the QFX10000 Cable Management System" on page
QFX10000 Rack Requirements on page 109
QFX10000 Clearance Requirements for Airflow and Hardware Maintenance on page 111
QFX10016 Chassis Lifting Guidelines on page 306
After you prepare the installation site as described in
Checklist" on page 105, you can unpack the switch.
NOTE: The chassis is maximally protected inside the shipping box. Do not
unpack it until you are ready to begin installation.
Ensure that you have the following parts and tools available to unpack the QFX10016:
A 13/32 in. (10 mm) open-end or socket wrench to remove the bracket bolts from the
shipping pallet
A box cutter or packing knife to slice open the nylon straps and tape that seal the crate
and boxes
The chassis ships in a cardboard box that has a two-layer wooden pallet base with foam
cushioning between the layers. The switch chassis is bolted to the pallet base.
The shipper has the option to either ship the front panel separately or to ship along with
the chassis. If the front panel arrives with the chassis, set aside the front panel box until
you are ready to verify the contents of the order.
or "Connecting DC Power to a QFX10000" on
"Configuring a QFX10000" on
235.
"QFX10000 Site Preparation
Copyright © 2017, Juniper Networks, Inc.
"Connecting
"Connecting
168.
and