Figure 116: Removing A Sib Cover Plate On A Qfx10008 - Juniper QFX10016 Hardware Manual
Hide thumbs
Also See for QFX10016:
- Hardware manual (439 pages) ,
- Quick start manual (31 pages) ,
- Hardware manual (306 pages)
Table of Contents
Advertisement
QFX10016 Switch Hardware Guide
218
Figure 116: Removing a SIB Cover Plate on a QFX10008
Lift the SIB by the handle with one hand and support the lower edge with the other
5.
hand.
Holding the SIB vertically, slide the SIB into the open slot until the ejector handles
6.
engage and start to close.
Grasp the two ejector handles and fold them inward until they latch to seat the SIB
7.
(see
Figure 117 on page 219
QFX10016).
for the QFX10008 and
Figure 118 on page 220
Copyright © 2017, Juniper Networks, Inc.
for the
Advertisement
Table of Contents
