Figure 89: Esd Point On Qfx10008 Chassis Rear; Figure 90: Esd Point On Qfx10016 Chassis Rear - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide
190
Attach the electrostatic discharge (ESD) grounding strap to your bare wrist, and
1.
connect the strap to the ESD point on the chassis. There is an ESD point located next
to the protective earthing terminal and below
Figure 89 on page 190) or below

Figure 89: ESD Point on QFX10008 Chassis Rear

1— ESD point

Figure 90: ESD Point on QFX10016 Chassis Rear

1— ESD point
If the power supply slot has a cover panel on it, insert your thumb and forefinger into
2.
the finger holes, squeeze and pull the cover out of the slot. Save the cover panel for
later use. See Figure 91 on page 191
Figure 92 on page 191 for the QFX10016.
on the QFX10008 rear panel (see
PSU 5
on the QFX10016 (see
PSU_9
for removal on a QFX10008 and
Copyright © 2017, Juniper Networks, Inc.
Figure 90 on page 190).