Software Features; Table 35: Ethernet Link Leds (Et Interfaces) - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide
Table 34: Valid et Interface Link Combinations of Every Two ot Ports (continued)
Modulation
Format Aggregate Data Rate
16-QAM and 3 x 100 Gigabit Ethernet
QPSK
8-QAM 3 x 100 Gigabit Ethernet
QPSK and QPSK 2 x 100 Gigabit Ethernet

Table 35: Ethernet Link LEDs (et Interfaces)

Color Description
Unlit The
Solid green The
Blinking green The link is up on the

Software Features

76
Interface Data Rate
ot
Ports 0, 2, 4
200 Gbps
150 Gbps
100 Gbps
et interface is down.
et interface is up but there is no activity.
et interface and there is activity.
Compliance with ITU G.709 and G.798
Transport interface and state model (GR-1093)
Performance monitoring features such as alarms, threshold-crossing alarms, OTU/ODU
error seconds, and FEC and bit error rate (BER) statistics
SNMP management of the MIC based on RFC 3591, Managed Objects for the Optical
Interface Type, including the following:
Black Link MIB–jnx-bl.mib
IFOTN MIB–jnx-ifotn.mib
Optics MIB–jnx-optics.mib
FRU MIB–jnx-fru.mib
User-configurable optics options:
Modulation format: 16QAM, 8QAM, QPSK
FEC mode (15% SDFEC or 25% SDFEC)
Differential and non-differential encoding modes
Transmit (TX) laser enable and disable
TX output power
et
1, 3, 5 Interface
100 Gbps 0, 1, 2
150 Gbps 0, 1, 2
100 Gbps 0,2
Copyright © 2017, Juniper Networks, Inc.
Configuration
Independent QPSK and
16-QAM
2 Coupled 150 Gbps
8-QAM
Independent 100G QPSK