Figure 56: Bracket Bolt Removal - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide
144
Remove the cardboard accessory box.
5.
Remove the foam padding from the top of the box.
6.
Remove the plastic cover from the switch chassis.
7.
Use a 13/32 in. (10 mm) open-end or socket wrench to remove the four sets of bracket
8.
bolts that secure the chassis to the shipping pallet (see

Figure 56: Bracket Bolt Removal

Unpack the accessory box and lay out the contents so that they are ready for use.
9.
Verify that your order includes all appropriate parts. See
10.
Order to the Packing List" on page 146
on page 12 for information about base configurations and redundant configurations.
Store the brackets and bolts inside the accessory box.
11.
Save the shipping box and packing materials in case you need to move or ship the
12.
switch at a later time.
Figure 56 on page
"Comparing the QFX10000
and "QFX10016 Components and Configurations"
Copyright © 2017, Juniper Networks, Inc.
144).