Control Board Components; Qfx10000 Control Board Leds; Figure 18: Control Board Faceplate - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide

Control Board Components

Related
Documentation

QFX10000 Control Board LEDs

28
Communication to all components such as line cards, Switch Interface Boards (SIBs),
and power and cooling
Transparent clocking
Alarm and logging functions
Each Control Board consists of the following internal components:
Quad-core 2.5 GHz CPU
32 GB SDRAM
50 GB or 100 GB onboard SATA SSD
Other standard interfaces are shown in

Figure 18: Control Board Faceplate

1— Control Board status LEDs
2— Console port
3— PTP-capable connections: SMB In, SMB Out,
10 MHz In, 10 MHz Out
4— Ethernet management ports: RJ-45 for
10/100/1000 BASE-T and small-form factor
pluggable (SFP) for fiber. If both copper and
fiber cables are installed, the RJ-45 is the
default.
Handling and Storing QFX10000 Line Cards, Control Boards, and SIBs on page 213
Installing a QFX10000 Control Board on page 239
The QFX10000 Control Boards have four types of LED indicators (see
Figure 19 on page 29).
Figure 18 on page 28.
5— USB 2.0 port
6— SATA SSD slot
7— Reset button
8— Four SFP+ ports (reserved for future use)
Copyright © 2017, Juniper Networks, Inc.