Power System Components And Descriptions; Figure 26: Ac Power Supply; Figure 27: Power Cord Retainer For An Ac Power Supply - Juniper QFX10016 Hardware Manual

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.

Figure 26: AC Power Supply

Each AC power supply comes with two power cord retainers that hold the power cords
in place. See Figure 27 on page
nut. The ends of the clip hook into the bracket holes on each side of the AC appliance
inlet on the faceplate. The adjustment nut holds the power cord in the correct position.
For instructions for installing the power cord retainers, see
QFX10000" on page 165.

Figure 27: Power Cord Retainer for an AC Power Supply

Each power supply connects to the power rail in the switch. The power rail distributes
the output power produced by the power supplies to different switch components. Each
AC power supply provides power to all the components in the switch.
Each power supply has its own fan and is cooled by its own internal cooling system. Hot
air exhausts from the rear of the chassis.
QFX10000 AC Power Specifications on page 119
QFX10000 AC Power Supply LEDs on page 48
Installing a QFX10000 AC Power Supply on page 189
Removing a QFX10000 AC Power Supply on page 194
Chapter 5: Power System Components and Descriptions
45. Each power cord retainer has a clip and an adjustment
"Connecting AC Power to a
45