Figure 120: Esd Point On Qfx10016 Chassis Rear - Juniper QFX10016 Hardware Manual

Copyright © 2017, Juniper Networks, Inc.

Figure 120: ESD Point on QFX10016 Chassis Rear

Remove the appropriate fan tray (see
4.
Loosen the captive screws at the top and bottom of the card.
5.
Grasp both ejector handles and spread them apart. The SIB slides about a quarter of
6.
the way out of the slot. See
Chapter 18: Replacing Switch Fabric Cards
"Removing a QFX10000 Fan Tray" on page
Figure 121 on page 224.
180).
223