Qfx10000 Cable Specifications For Console And Management Connections; Table 55: Qsfp+ Mpo Fiber-Optic Crossover Cable Pinouts; Table 56: Cable Specifications For Console And Management Connections For - Juniper QFX10016 Hardware Manual

Table 55: QSFP+ MPO Fiber-Optic Crossover Cable Pinouts

Pin
1
2
3
4
5
6
7
8
9
10
11
12
Related
Documentation

QFX10000 Cable Specifications for Console and Management Connections

Table 56: Cable Specifications for Console and Management Connections for the QFX10000
Line of Switches
Port on QFX Series
Device Cable Specification
Console port RS-232 (EIA-232) serial cable
Copyright © 2017, Juniper Networks, Inc.
Determining Transceiver Support for the QFX5110
Table 56 on page 129 lists the specifications for the cables that connect the QFX10000
line of switches to a management device.
NOTE: The QFX10000 models can be configured with SFP management
ports that support 1000BASE-SX transceivers. See
for more on the fiber-optic cables required for use with these transceivers.
Tool
Cable Supplied
One 7-foot (2.13-meter) long
RJ-45 patch cable and RJ-45 to
DB-9 adapter
Chapter 10: Transceiver and Cable Specifications
Pin
12
11
10
9
8
7
6
5
4
3
2
1
Maximum Length
7 feet (2.13 meters)
The Hardware Compatibility
Device
Receptacle
RJ-45
129