Qsfp+ And Qsfp28 Status And Activity Leds; Figure 47: Sfp+ Port Indicators And Status Leds On A Qfx10000-60S-6Q Line; Figure 48: Led Indicators On Qsfp+ And Qsfp28 Ports On Qfx10000-60S-6Q; Table 27: Network Port Status And Activity Leds For Sfp+ Ports On A Qfx10000-60S-6Q Line Card - Juniper QFX10016 Hardware Manual

Table 27: Network Port Status and Activity LEDs for SFP+ Ports on a QFX10000-60S-6Q Line
Card
Color State
Unlit Off
Green On steadily
Yellow or Amber Slow blink, or blip
Blinking

QSFP+ and QSFP28 Status and Activity LEDs

Copyright © 2017, Juniper Networks, Inc.
Figure 47: SFP+ Port Indicators and Status LEDs on a QFX10000-60S-6Q
Line Card
An up arrow indicates the first row.
A circle indicates the second row.
A down arrow indicates the third row.
Description
The port is administratively disabled, there is no power, the link is down, or a
transceiver is not present.
A link is established.
The beacon function is enabled on one or more sub-channels.
The interface has a fault condition.
All QSFP+ and QSFP28 ports have an up or down indicator for each port and four
bi-colored LEDs that show port status and link activity based on whether or not the port
is configured for channelization. See
Figure 48: LED Indicators on QSFP+ and QSFP28 Ports on
QFX10000-60S-6Q Line Card
Chapter 7: Line Card Components and Descriptions
Table 28 on page 70.
69