Juniper QFX10016 Hardware Manual page 318

QFX10016 Switch Hardware Guide
Related
Documentation
294
NOTE: Fibre Channel alarms are only valid on QFX3500 devices.
NOTE: When red alarms or major alarms are issued on QFX5100 and EX4600
switches, the alarm LED glows amber instead of red.
By default, major alarms are configured for interface link-down conditions on the control
plane and management network interfaces in a QFabric system. The link-down alarms
indicate that connectivity to the control plane network is down. You can configure these
alarms to be ignored using the
NOTE: If you configure a yellow alarm on the QFX3008-I Interconnect device,
it will be handled as a red alarm.
Understanding Alarms on page 289
statement at the [
alarm edit chassis
Copyright © 2017, Juniper Networks, Inc.
] hierarchy level.