CHAPTER 5
Power System Components and
Descriptions
QFX10000 AC Power Supply
AC Power Supply Description
Copyright © 2017, Juniper Networks, Inc.
QFX10000 AC Power Supply on page 43
QFX10000 DC Power Supply on page 46
QFX10000 AC Power Supply LEDs on page 48
QFX10000 DC Power Supply LEDs on page 49
QFX10000 modular switches can use either AC or DC power supplies.
CAUTION:
Do not mix AC and DC power supplies in the same chassis.
This topic includes:
AC Power Supply Description on page 43
The QFX10000 AC power supplies are 2700 W, hot-insertable, hot-removable,
field-replaceable units (FRUs). You can install up to six power supplies in a QFX10008
in the slots labeled
through
PSU 0
In QFX10016, you can install up to 10 power supplies in the slots labeled
PSU 9
. Power supplies install in any available power supply slot.
The AC power supply supports 200–240 VAC. The output is 12 VDC; the output power
is 2700 W.
WARNING:
The switch is pluggable type A equipment installed in a
restricted-access location. It has a separate protective earthing terminal on
the chassis that must be connected to earth ground permanently to ground
the chassis adequately and protect the operator from electrical hazards.
(top to bottom) located in the rear of the chassis.
PSU 5
through
PSU 0
43