Installing A T640 Routing Engine; Figure 153: Removing The Routing Engine Cover; Figure 154: Removing A Routing Engine - Juniper T640 Hardware Manual

T640 Core Router Hardware Guide

Installing a T640 Routing Engine

318
Grasp the Routing Engine by the ejector handles, and slide it about halfway out of the
9.
chassis.
Place one of your hands underneath the Routing Engine to support it and slide it
10.
completely out of the chassis.
Place the Routing Engine on the antistatic mat.
11.
If you are not replacing the Routing Engine now, reinstall the Routing Engine cover
12.
and tighten the screws on the corners of the cover to secure it to the chassis (see
"Reinstalling the Routing Engine Cover" on page

Figure 153: Removing the Routing Engine Cover

Figure 154: Removing a Routing Engine

To install a Routing Engine (see
318).
Figure 155 on page 320):
Copyright © 2017, Juniper Networks, Inc.