Gunzip - Cisco MDS 9000 series Command Reference Manual

Chapter 9 G Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

gunzip

To uncompress (unzip) LZ77 coded files, use the gunzip command in EXEC mode.
Syntax Description
bootflash:
slot0:
volatile:
filename
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.1(1)
Usage Guidelines This command is useful in uncompressing large files. The gunzip command replaces the compressed.gz
source file with an uncompressed file.
Examples
This example unzips a compressed file on volatile: directory and displays the space used:
switch# dir
Usage for volatile://
switch# gunzip Samplefile
switch# dir
Usage for volatile://
Related Commands Command
gzip
OL-8413-07, Cisco MDS SAN-OS Release 3.x
gunzip {bootflash: | slot0: | volatile:} filename
Source location for the compressed file and destination of the uncompressed file.
Source location for the compressed file and destination of the uncompressed file.
Source location for the compressed file and destination of the uncompressed file.
This is the default directory.
The name of the compressed file.
Modification
This command was introduced.
266069 Jul 04 00:51:03 2003
266240 bytes used
20705280 bytes free
20971520 bytes total
1525859 Jul 04 00:51:03 2003 Samplefile
1527808 bytes used
19443712 bytes free
20971520 bytes total
Description
Compresses a specified file using LZ77 coding.
Samplefile.gz
Cisco MDS 9000 Family Command Reference
gunzip
9-5