Show Cloud Membership - Cisco MDS 9000 series Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show cloud membership

To display membership information about the cloud, use the show cloud membership command.
Syntax Description all
interface
gigabitethernet
slot/port
port-channel number
unresolved
Defaults
None.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines
None.
Examples
The following example displays the members of clouds.
switch# show cloud membershp
Undiscovered Cloud
#members=3
Cloud 2
#members=1
Cloud 3
#members=1
Cloud 4
#members=1
OL-8413-07, Cisco MDS SAN-OS Release 3.x
show cloud membership [all | interface {gigabitethernet slot/port | port-channel number} |
unresolved]
Displays all clouds and cloud members.
Displays all members of a cloud containing a specified interface.
Specifies a Gigabit Ethernet interface by slot and port number. The range is
1 to 6.
Specifies a PortChannel interface. The range is 1 to 128.
Displays unresolved members of the cloud.
Modification
This command was introduced.
port-channel 1[20:00:00:05:30:00:a7:9e] IP Addr fe80::205:30ff:fe00:a412
port-channel 1.250[20:00:00:05:30:00:a7:9e] IP Addr 3000:2::1
port-channel 1.250[20:00:00:05:30:00:a7:9e] IP Addr fe80::205:30ff:fe00:a412
port-channel 1[20:00:00:05:30:00:a7:9e] IP Addr 3000:1::1
GigabitEthernet1/1[20:00:00:05:30:00:a7:9e] IP Addr 10.10.10.1
GigabitEthernet1/2[20:00:00:05:30:00:a7:9e] IP Addr 10.10.60.1
show cloud membership
Cisco MDS 9000 Family Command Reference
22-31