Snmp-Server User - Cisco MDS 9000 series Command Reference Manual

snmp-server user

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
snmp-server user
To configure SNMP user information, use the snmp-server user command in configuration mode. To
disable the configuration or to revert to factory defaults, use the no form of the command.
Syntax Description username
group-name
auth
md5
sha
password
priv
aes-128
auto
localizedkey
enforcePriv
Defaults None.
Command Modes Configuration mode.
Command History Release
1.0(2)
1.0(3)
2.0(1b)
3.1(2)
Usage Guidelines
The localized keys are not portable across devices as they contain information on the engine ID of the
device. If a configuration file is copied into the device, the passwords may not be set correctly if the
configuration file was generated at a different device. We recommend that passwords be explicitly
configured to the desired passwords after copying the configuration into the device.
Cisco MDS 9000 Family Command Reference
21-40
snmp-server user username [group-name] [auth {md5 | sha} password [priv [password [auto |
localizedkey [auto]]] | aes-128 password [auto | localizedkey [auto] | auto | localizedkey
[auto]]] | [enforcePriv]
no snmp-server user name [group-name | auth {md5 | sha} password [priv [password [auto |
localizedkey [auto]]] | aes-128 password [auto | localizedkey [auto] | auto | localizedkey
[auto]]] | [enforcePriv]
Specifies the user name. Maximum length is 32 characters.
Specifies role group to which the user belongs. Maximum length is 32
characters.
Sets authentication parameters for the user.
Sets HMAC MD5 algorithm for authentication.
Uses HMAC SHA algorithm for authentication.
Specifies user password. Maximum length is 64 characters.
Sets encryption parameters for the user.
Sets 128-byte AES algorithm for privacy.
Specifies whether the user is autocreated (volatile).
Sets passwords in localized key format.
Enforces privacy for the specified user.
Modification
This command was introduced.
Added the localizedkey option.
Added the auto and aes128 options.
Added the enforcePriv keyword.
Chapter 21 S Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x