Debug Biosd - Cisco MDS 9000 series Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug biosd

To configure bios_daemon debugging, use the debug biosd command in EXEC mode. To disable a
debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description all
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
2.1(1)
Usage Guidelines None.
Examples
The following example displays the system output when the debug biosd command is issued:
switch# debug biosd
Related Commands Command
no debug all
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug biosd all
no debug biosd all
Enables all bios_daemon debug options.
Modification
This command was introduced.
Description
Disables all debugging.
Cisco MDS 9000 Family Command Reference
debug biosd
6-5